Amana Tool 46107 Solid Carbide Spiral Plunge 1/2 Dia x 1-5/8 x 1/2 Inch Shank Up-Cut Rolair 4090HK17/20 Wheeled 5.5HP Gas Air Compressor 3 CFM @ 90 PSI

3 CFM @ 90 PSI

Precisely angled adjustment of casing and molding without calculations – in conjunction with the bevel

On the jobsite or in the workshop

Improve filtration performance and maintain optimum suction by using the new manual filter cleaning feature

For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools

Amana Tool 46107 Solid Carbide Spiral Plunge 1/2 Dia x 1-5/8 x 1/2 Inch Shank Up-Cut Rolair 4090HK17/20 Wheeled 5.5HP Gas Air Compressor 3 CFM @ 90 PSISpiral flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut. The Up Cut shears from the bottom up pulling chips from the bottom up thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. Special unique carbide grade increased clearance geometry and razor sharp