Boomerang Jets Turbinator Fuel Tank and Smoke 2 Tank Combination Auxiliary If you need 3/16" ID

If you need 3/16" ID fittings you must order the Dreamworks Ventrix High Flow Fuel and Smoke Tank (2 tank set)

Shown here with JET TECH O-ring style fuel fittings as standard equipment

3" wide per tank

49 L) The tanks sit side by side at the CG and are assembled and pressure tested with the Jet Tech O-ring style 1/8" ID Standard size Fuel Fitting and vent installed

The inner tube dimension as well as the bell mouth size are determined by your turbine output

Boomerang Jets Turbinator Fuel Tank and Smoke 2 Tank Combination Auxiliary If you need 3/16" IDThis is the Fuel and Smoke 2 tank set for the Boomerang Jets Turbinator Tank. The Kevlar Fuel tank is 10. 75" (273 mm) long x 5. 0" (127 mm ) tall x 3. 7" (94 mm ) wide and carries 110 oz (3. 25 L) of Fuel and the smoke tank carries 38 oz (1. 12 L). These Fuel and Smoke tanks sit side by side of each other over the CG of the Turbinator resulting in little or no trim changes with fuel and smoke burn. Capacity of the Smoke tank can be reduced and the