MKT FASTENING 271413S Wedge Anchor 1/4 -20 SS 1/4 in PK20 Electrical & Lighting 2 Nominal Valve Size 1/2

2 Nominal Valve Size 1/2 in Actuator Air Port Connection 1/8 in NPT Connection Type - Side 1 Flare Connection Type - Side 2 Flare For Media Water Diaphragm Material Reinforced Synthetic Rubber Operating Temperature - Maximum 281 Degrees F Maximum Pressure - Operating 240 psi Valve Deactivated State Normally Closed (NC) Body Material Brass Diaphragm Valve Type 2-Way Stem Material Stainless Steel

ANDERSON METALS 70621606 90 Degrees Street Elbow Brass CA2745 3/8 in Female NPT 1 1/16 in 18 3/8 in -18 3/8 in Male NPT 11/16 in 18 3/8 in -18 1 000 psi Maximum Operating Pressure

375 in Thread Pitch 0

GRAINGER 21TF40 Thread Sealant Tape Specific Sealing Application For Stainless Steel Thread Sealing Overall Width 1/2 in Overall Length 50 ft Minimum Operating Temperature -400 Degrees F Maximum Operating Temperature 500 Degrees F Maximum Operating Pressure for Liquids 2 250 psi Maximum Operating Pressure for Gases 2 250 psi Maximum Linear Density 1

03 in Tensile Strength (As Welded) 13 ksi Yield Strength (Minimum Required) Not Rated Yield Strength (As Welded) Not Specified Spool Type Plastic Spool Series ER1100 Weight 1 lb For Material Type Aluminum to Aluminum For Material Grade 1050 1060 1070 1100 1145 1199 1200 1230 1350 1370 1420 1421 1424 1430 1440 1441 1441K 1445 1450 1460

MKT FASTENING 271413S Wedge Anchor 1/4 -20 SS 1/4 in PK20 Electrical & Lighting 2 Nominal Valve Size 1/2MKT FASTENING 271413S Wedge Anchor System of Measurement Inch Anchor Diametre 1 4 in Thread Size 1 4 In. 20 Overall Length 1 3 4 in Thread Length 7 8 in Eyelet Hole Size Not Applicable Material Stainless Steel Material Grade Class 316 Finish Plain Compatible Material Concrete Drill Bit Size 1 4 in Minimum Installation Depth 1 1 8 in Minimum Material Thickness 4 in Ultimate Shear Strength (4 000 psi Concrete) 1 472 lb Ultimate Tension Strength (4 000