Electric Linear Actuator A Fixed Mounting Flat Base (Model 0043070) Automatic Controllers 8) Setting dual button control

8) Setting dual button control single channel mode (Each two buttons on the transmitter controls one channel

Case size: 115mm x 95mm x 40mm (4

5 means that the linear actuators have reached the stroke position of 35MM

a specified stroke of 780 mm is less than the standard stroke of the ordered actuator (800 mm)

Suitable window width: 0

Electric Linear Actuator A Fixed Mounting Flat Base (Model 0043070) Automatic Controllers 8) Setting dual button controlFixed mounting flat base for electric linear actuator A Aluminum material. Can be used to replace the linear actuator A bottom mounting bracket. Can be used for vertical mounting linear actuators A Installation operation: 1. Use a hexagonal wrench to unscrew the three screws at the bottom of linear actuator A and remove the original bottom shell. 2. Install the flat base to the bottom of linear actuator A and tighten the three screws with a hexagonal