RAM® Strap Hose Clamp Ball Base 1.5" - 2.1" 1.5" x 3.5" 1" plate with a 35mm

1" plate with a 35mm X 75mm VESA hole pattern

The plate includes a set of four screws to connect the plate to the back of the Roadmate cradle

The RAM RAM-109VS-4U consists of a single swing arm mount with 1

a 1/2" NPT Hole on one side and a socket for a 1

Using a keyed locking knob and slim restraining arms

RAM® Strap Hose Clamp Ball Base 1.5" - 2.1" 1.5" x 3.5" 1" plate with a 35mmThe RAM B 108BU HUM1 consists of a 1" diameter rubber ball connected at a right angle to a v shaped base. The RAM B 108BU HUM1 accommodates rails from 1. 5" to a maximum of 2. 1" in diameter. To mount the RAM B 108BU HUM1 base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screwdriver until the strap has a firm hold on the rail. The RAM B 108BU HUM1